Mouldings

Stock Mouldings

Base and Case

Base and Case are the finishing touches to any room. Functionally they are a remarkable transition from wall to floor, door, or window. From a design perspective, they can set the tone of the entire space.

The larger sizes are generally used for base trim along the floor, and the narrower width of the same pattern is used around doors and windows. The larger 3 ¼” size can also be used around doors and windows for a dramatic effect.

11/16″ x 3 1/4″ Pattern K Base (CC-456) – Red Oak

11/16″ x 2 1/4″ Pattern K Case (CC-356) – Red Oak & Ash

11/6″ x 3 1/4″ Cove Base (CC-493) – Red Oak

11/16″ x 2 1/4″ cove case (CC-393) – Red Oak

3 1/4″ Flute Case (CC-314) – Red Oak & S. Maple

6 INCH CROWN (CC-60) – RED OAK, SOFT MAPLE

3/4 INCH X 1 3/4 INCH CROWN & BED (CC-74) – RED OAK

1 3/4 INCH CROWN (CC-56) – RED OAK

4 5/8 INCH DENTIL CROWN (CC-46) – RED OAK, SOFT MAPLE

2 1/4 INCH CROWN (CC-54) – RED OAK

2 3/4 INCH CROWN (CC-52) – RED OAK

3 1/4 INCH CROWN (CC-51) – RED OAK, SOFT MAPLE & POPLAR

4 1/4 INCH CROWN (CC-48) – RED OAK, SOFT MAPLE

3/4 X 1 INCH DENTIL TEETH (CC-46DT) – RED OAK, SOFT MAPLE

Crowns

Crown is an essential design element that is sometimes omitted when trimming a room. Its impact can be anything from subtle to profound. It can provide a gentle accent when smaller sizes are used. Larger-sized crowns can make a grand impression. Crowns make such an essential contribution to the feeling of a room that they should not be overlooked even when cost is a consideration.

Panel & Applied Moulds

Taking a step beyond the ordinary sometimes requires the correct details. Panel moulds can bring just the touch to cabinets and paneling or provide a decorative edge to just about any sheet good or other slightly raised surfaces. Applied moulds can be used the same way, except they have a flat back and can be applied to flat surfaces. Applied mould can also be used as chair rails, to edge wallpaper borders, or as added detail to other moldings.

5/8 INCH X 1 3/4 INCH A-6 APPLIED MOULD (CC-A6) – RED OAK, SOFT MAPLE

1 1/16 INCH X 1 3/8 INCH CR-CHAIR RAIL (CC-CR30) – RED OAK

1 1/16 INCH X 1 3/8 INCH CR-31 CHAIR RAIL (CC-CR31) – RED OAK

1 7/8 INCH PM-6 LIBRARY MOULD (CC-PM6) – RED OAK, SOFT MAPLE

3/4 INCH X 13/16 INCH P-31 APPLIED MOULD (CC-P31) – RED OAK, SOFT MAPLE, & POPLAR

3/4 INCH X 3/4 INCH QUARTER ROUND (CC-105) – RED OAK

3/4 INCH X 3/4 INCH OUTSIDE CORNER (CC-206) – RED OAK & ASH (8′)

1 INCH X 1 INCH OUTSIDE CORNER (CC-205) – RED OAK & ASH (8′)

1/2 INCH X 3/4 INCH BASE SHOE (CC-126) – RED OAK, SOFT MAPLE, & POPLAR

3/8 INCH X 1 3/8 INCH OGEE DORR STOP (CC-916) - RED OAK, ASH, SOFT MAPLE, & POPLAR (7′)

3/4 INCH X 3/4 INCH INSIDE CORNER (CC-999) – RED OAK & ASH (8′)

1/4 INCH X 3/4 INCH FLAT SCREEN MOULD (CC-142) – RED OAK

3/8 INCH X 3/4 INCH CLOVERLEAF SCREEN MOULD (CC-137) – RED OAK

3/4 INCH X 3/4 INCH COVE (CC-93) – RED OAK

CC-3009 9/16 INCH X 1 3/16 INCH (A-9)

Custom Mouldings

Custom Cutting will run all your custom moulding needs. We have the state's largest selection of custom moulding profiles to meet your design style.

Need Truly Custom?

Here at Custom Cutting, we understand the desire to be unique. If you want something truly custom, we can help you design your own custom pattern. Or bring your own design, and we will make your home become genuinely custom.

Reclaimed Wood

Custom Cutting offers reclaimed material for those truly rustic projects. We can make your moulding for your house out of reclaimed material and offer flooring that can be run out of the same material. If you have your own reclaimed material, we can also process that. Please call for details.

What Makes This Possible?

CCM has 10,000 different knives used to create various mouldings. Each knife can cut a different profile. If none of these 10,000 profiles fits your needs, CCM can grind custom knives, allowing us to match any sample you may have perfectly. This also allows us to create custom mouldings based on your needs.